APC SERVICE BYPASS PDU, 230V 16AMP Hardwire APC Maintenance Bypass Panels , Input: 230V , Output: 230V , Output Connections: Hard Wire 3-wire (H N + G),IEC Jumpers Output Nominal Output Voltage: 230V Maximum Total Current Draw per Phase: 16A Output Connections: (1) Hard Wire 3-wire (H N + G) (1) IEC Jumpers Overload Protection: Yes Cord Length: 1 meters Input Nominal Input Voltage: 230V Input Frequency: 50/60 Hz Acceptable Input Voltage: 220-240 VAC Maximum Line Current per phase: 16A Maximum Input Current per phase: 16A Load Capacity :3000 VA Load Power Factor Range: 0 to 1 Physical Net Weight: 2.27 KG Maximum Height: 89.00 mm Maximum Width: 432.00 mm Maximum Depth: 76.00 mm Shipping Weight: 3.45 KG Shipping Height: 151.00 mm Shipping Width: 463.00 mm Shipping Depth: 295.00 mm Color: Black Units per Pallet: 56.00 Environmental Operating Environment: 0 - 40 °C Operating Relative Humidity: 0 - 95% Operating Elevation: 0-4500 meters Storage Temperature: -15 - 45 °C Storage Relative Humidity: 0 - 95% Storage Elevation: 0-15000 meters Conformance Regulatory Approvals: VDE Standard Warranty: 2 years repair or replace Environmental Compliance: RoHS,REACH: Contains No SVHCs Features Transfer rate is within the industry standard and within the time power supplies will typically drop loads. The transfer of one power source to another is seamless to the connected equipment avoiding disruption of equipment performance. (3) Breaker maintenance bypass panel to isolate the UPS from the critical load